Product Overview and Specifications

This is a valuable product that has already been discontinued.

Standard applicable Motors: 5.5kW
Power supply voltage: Three-phase 200-230V 50/60Hz

Product Condition

I have confirmed that it works properly. We are checking the following:
・An Induction Motors was connected and auto-tuning was performed using sensorless vector control.
・It is possible to set the frequency from the Touch Displays and operate the Motors(forward/reverse).
・The Motors must be able to operate (forward/reverse) with an external signal at the set frequency.
・The frequency can be changed while the Motors is running.
In order to prevent unexpected behavior during use, the parameters are initialized and returned to the factory shipment state before shipment.

We do not check control methods other than sensorless vector control.

Accumulated operation time: 788h

It is shorted with a wire instead of a short bar.

The rubber (barrier) of the cable pull-in plate was hardened while deformed, so I cut it all off with a nipper.
There are scratches and stains here and there, but nothing that stands out.
I opened the cover and checked the inside, but it seems to be a beautiful product as a second-hand product.
(A film is pasted on the panel.)