Product Overview and Specifications

It is a valuable product that has already been discontinued.

Power supply voltage: 3 phase 200-240V 50/60Hz
Standard application Motors: 0.4kw
Rated current: 2.5A
Maximum frequency: 50-400Hz

We could not clarify the specifications of "Z" at the end of the model. Compared to the model number without "Z", there was no difference in the performance, so I was able to change the parameter as usual to drive the Motors.

Product Condition

I confirmed that it works properly. The following confirmation is performed.
・The Motors rotates (straight/reverse) as the frequency set in the Touch Displays .
・ You can select the Motors(regular/reverse/frequency) by external signal.
・ Connect the switch to the control input (X1-X4/fwd/REV/BX/RST) and recognize the signal.
・ The frequency (rotation speed) can be changed due to the volume during the Motors drive.
・ Connect the lamp to the open collector output and the contact output, and light up by the ON signal.
・ The signal is output from the analog monitor (FMA) and the frequency monitor (FMP).

The rubber bush is not installed.
There are rubbing scratches in some places, but the condition is relatively good.