Product Overview and Specifications

This is a valuable product that is no longer in production.

Power supply voltage: 3 phase 200-240V 50/60Hz
Standard applicable Motors: 2.2kW
Rated current: 10A
Highest frequency: 50-400Hz

Product Condition

I confirmed that it works properly. We are checking the following.
・The Motors should rotate (forward/reverse) according to the frequency set on the Touch Displays .
- Motors(forward rotation/reverse rotation/frequency) can be selected using an external signal.
・Connect a switch to the control input (X1-X4/FWD/REV/BX/RST) and recognize the signal.
・The frequency (rotation speed) can be changed using the volume while the Motors is running.
・Connect a lamp to the open collector output and contact output, and turn it on by the ON signal.
- Signals must be output from the analog monitor (FMA) and frequency monitor (FMP).

A rubber bushing is attached.
There are scratches here and there, but the condition is relatively good.