Product Overview and Specifications

This is a valuable product that is no longer in production.

Controller type: Stored data type Number of data settings: 4 steps Data setting method: Set data using touch switches on the front panel Positioning method: Step selection positioning method Oscillation specifications Number of control axes: 1 axis Pulse output method: 2-pulse output method Acceleration/deceleration pattern: Linear operation pattern Relative positioning operation: Supported Continuous operation: Supported Mechanical origin return operation: Supported Power supply voltage: DC24V±5%

This product was manufactured before 1999 and does not have the function to switch pulse output methods.

Product Condition

We have confirmed that it works properly. We have checked the following:
· Accurate positioning can be performed by connecting to a Servo Amplifiers(MR-J3-10A).
- A Sensors is connected to the input terminal (HOMELS) and the mechanical origin return operation can be performed normally.
· A switch can be connected to the input terminals (M0 [CW scan] and M1 [CCW scan]) to select data.
- A switch is connected to the input terminal (start) and the selected data is executed.
- A switch must be connected to the input terminal (external stop) so that all operations stop when power is not applied.
- Connect an LED to the output terminal (busy) and ensure that it outputs normally.
- Test mode works properly.

Although the socket is not included, it is not a problem as it can be used as a replacement for the same product.

There are scratches all over the product, but it does not affect use.