Product Overview and Specifications

This is a valuable product that has already been discontinued.

Rated output: 100W
Rated torque: 0.32N・m
Momentary maximum torque: 0.95N・m
Rated rotation speed: 3000r/min
Maximum rotation speed: 4000r/min

Shaft diameter: Φ8mm
Shaft shape: D cut

Product Condition

We have confirmed that it actually rotates and operates normally. We have also confirmed that it can be positioned accurately by connecting it to a Servo Amplifiers(MR-J10A) and that there is no abnormal noise or runout.

The cables are originally 50cm long, but due to the replacement of the connectors, each cable has been shortened.
・Power cable: approx. 37cm
・Encoder cable: approx. 18cm

There are some scratches and areas where the paint has peeled off in small places. There is also some rust on the shaft surface, but it can be installed on the device without any problems.
When rotating at high speeds, a loud noise that seems to be coming from the bearings can be heard, but there is no unevenness in operation from high to low speeds, and the Servo Motors functions normally for positioning, etc.