Product Overview and Specifications

This is a valuable product that has already been discontinued. normal

Rated output: 300W
Rated torque: 0.95N・m
Momentary maximum torque: 2.9N・m
Rated rotation speed: 3000r/min
Maximum rotation speed: 4000r/min

Shaft diameter: Φ11mm
Shaft shape: straight (keyway)

Product Condition

It is confirmed that it actually rotates and operates normally. It has been confirmed that the positioning operation can be performed accurately by connecting to the Servo Amplifiers(MR-J40A), and that there is no abnormal noise or runout.

The original length of the cable is 30 cm, but the cable has been shortened due to the replacement of the connector.
・A power cable: Approximately 42-46cm
・Encoder cable: about 42-45cm

The product image is a representative image. The image and product condition and cable length may vary slightly depending on the individual.

There are traces of rust and line scratches on the shaft, but there is no problem in installing it to the device. In addition, there are some scratches and peeling of the paint, but these do not affect the use.