Product Overview and Specifications

This is a valuable product that has already been discontinued.

Rated output: 100W
Rated torque: 0.32N・m
Momentary maximum torque: 0.95N・m
Rated rotation speed: 3000min ^-1
Maximum rotation speed: 4500min ^-1

With electromagnetic brake (DC24V)

Reducer model number: K6505K
Reduction ratio (actual reduction ratio): 1/5 (9/44)
Shaft diameter: Φ16mm
Shaft shape: straight (with key groove and shaft end screw hole)

Product Condition

It is confirmed that it actually rotates and operates normally. By connecting to the Servo Amplifiers(MR-J2S-10A), it has been confirmed that the positioning operation can be performed accurately and that there is no abnormal noise or runout.
Also, the electromagnetic brake works normally.

Key not included.

A connector with special specifications was attached, so I replaced the connector. Due to the replacement, each cable is shortened by 9 cm for the encoder cable and by 7 cm for the power cable.
There is some rust on the shaft surface.
There are scratches here and there, but the condition is relatively good.

Please refer to this page for details on how to check the operation of this product at our company.