Product Overview and Specifications

This is a valuable product that is no longer in production.

Rated output capacity: 400W
Rated torque: 1.3N・m
Maximum torque: 3.8N・m
Rated rotation speed: 3000r/min-1
Maximum rotation speed: 4500r/min-1
Shaft diameter: Φ14mm
Shaft shape: Straight (no keyway)

Please see the manufacturer page for details.

Product Condition

We have actually rotated it and confirmed that it works properly. We have confirmed that it is connected to a Servo Amplifiers(MR-J2S-40B) and can perform accurate positioning operation, and that there is no abnormal noise or core runout.

The length of the cable is originally 30cm, but the cable has become shorter due to the replacement of the connector.
・Power cable: Approximately 25cm
・Encoder cable: Approx. 20cm

The coupling could not be installed due to rust, so the rust was removed and the coupling was adjusted to fit. There are noticeable rust marks on the entire shaft, but it can be installed to the device without any problems.
When rotating at high speed, there is a loud noise that seems to be caused by the bearings, but the operation is consistent from high to low rotations, and the Servo Motors functions normally for positioning and other purposes.

This page provides details on how we check the operation of this product.