Product Overview and Specifications

This is a valuable product that has already been discontinued.

Rated output capacity: 100W
Rated torque: 0.32N・m
Maximum torque: 0.95N・m
Rated speed: 3,000r/min
Maximum rotation speed: 4,500r/min

Shaft diameter: Φ8mm
Shaft shape: straight (no keyway), D-cut (additional machining)

Product Condition

We have confirmed that it actually rotates and operates normally. We have also confirmed that it can be positioned accurately by connecting it to a Servo Amplifiers(MR-J2-10A) and that there is no abnormal noise or runout.

The power cable and encoder cable are originally 30 cm long, but the cables have been shortened due to the replacement of the connectors.
・Power cable: approx. 22cm
・Encoder cable: approx. 18cm

This product is originally a round shaft, but has been machined to have a D-cut. The surface of the D-cut is slightly rough, so it appears to have been machined using a file or similar, but it still functions as a D-cut and can be installed on equipment without any problems.
When rotating at high speeds, a loud noise that seems to be coming from the bearings can be heard, but there is no unevenness in operation from high to low speeds, and the Servo Motors functions normally for positioning, etc.