Product Overview and Specifications

This is a valuable product that has already been discontinued.

Rated output capacity: 100W
Rated torque: 0.32N・m
Maximum torque: 0.95N・m
Rated speed: 3,000r/min
Maximum rotation speed: 4,500r/min

Shaft diameter: Φ8mm
Shaft shape: straight (no keyway), D-cut (additional machining)

Product Condition

It is confirmed that it actually rotates and operates normally. By connecting to the Servo Amplifiers(MR-J2-10A), it has been confirmed that the positioning operation can be performed accurately and that there is no abnormal noise or runout.

The original length of the cable is 30 cm, but the cable has been shortened due to the replacement of the connector.
・ Power cable: about 20cm
・Encoder cable: about 17cm

This product is originally a round shaft, but a D-cut has been added. Since the surface of the D-cut is slightly rough, it seems to have been processed using a file, etc., but it functions as a D-cut and can be installed on the device without any problems.
When rotating at high speed, there is an occasional rattling noise that seems to be generated by the bearing, but there is no unevenness in operation from high rotation to low rotation, and the function as a Servo Motors such as positioning is normal.