Product Overview and Specifications

This is a valuable product that has already been discontinued.

Rated output capacity: 200W
Rated torque: 0.64N・m
Maximum torque: 1.9Nm
Rated speed: 3,000r/min
Maximum rotation speed: 4,500r/min

Shaft diameter: Φ14mm
Shaft shape: straight (no keyway)

Corresponding standard: EN standard

Product Condition

We have actually rotated it and confirmed that it works properly. We have confirmed that it is connected to a Servo Amplifiers(MR-J2-20B) and can perform accurate positioning operation, and that there is no abnormal noise or core runout.

The length of the cable is originally 30cm, but each cable has been shortened due to the replacement of the connector.
・Power cable: Approximately 19-22cm
・Encoder cable: Approximately 19-24cm

The product image is a representative image. The image, product condition, and length of each cable may vary slightly depending on the individual item.
Although there are small spots of rust on the shaft, it can be installed to the equipment without any problems.
There are scratches overall, but there is no problem in using it.