Product Overview and Specifications

This is a valuable product that has already been discontinued.

Rated output capacity: 200W
Rated torque: 0.64N・m
Maximum torque: 1.9Nm
Rated speed: 3,000r/min
Maximum rotation speed: 4,500r/min

Shaft diameter: Φ14mm
Shaft shape: straight (no keyway), two-sided D-cut (additional machining)

With electromagnetic brake (DC24V)

Product Condition

It is confirmed that it actually rotates and operates normally. By connecting to the Servo Amplifiers(MR-J2-20B), it has been confirmed that the positioning operation can be performed accurately and that there is no abnormal noise or runout.
Also, the electromagnetic brake works normally.

The length of the power cable and encoder cable is originally 30 cm, but each cable is shortened due to the replacement of the connector.
・ Power cable: about 26cm
・Encoder cable: about 22cm
・A brake cable: Approximately 18cm

This product is originally a round shaft, but a D-cut has been added.
Since the surface of the D-cut is slightly rough, it seems to have been processed using a file, etc., but it functions as a D-cut and can be attached to the device without any problems.
There are scratches on the whole, but there is no problem in using it.