Product Overview and Specifications

This is a valuable product that has already been discontinued.

Rated output capacity: 50W
Rated torque: 0.16N・m
Maximum torque: 0.64N・m
Rated speed: 3,000r/min
Maximum rotation speed: 4,500r/min

Shaft diameter: Φ8mm
Shaft shape: straight (no keyway), D-cut (additional machining)

Product Condition

We have actually rotated it and confirmed that it works properly. Connected to a Servo Amplifiers(MR-C10A), we have confirmed that accurate positioning operation is possible and that there is no abnormal noise or core runout.

The length of the cable is originally 30cm, but the cable has become shorter due to the replacement of the connector.
・Power cable: Approximately 12-15cm
・Encoder cable: approx. 1.5-6cm

The product image is a representative image. The image, product condition, and cable length may vary slightly depending on the individual item.

This product is originally a round shaft, but has been additionally machined with a D cut. The surface of the D-cut is slightly rough, so it appears that it was processed using a file, etc., but it functions as a D-cut and can be installed on equipment without any problems.
There are some scratches overall, but the operation is quiet and there are no problems with using it.