Product Overview and Specifications

This is a valuable product that has already been discontinued.

Capacity: 200W
Power supply: 3-phase AC200-230V or single-phase AC200-230V 50/60Hz
Command interface: SSCNET III compatible

Manufacturer's suggested retail price: 230,000 yen

Please see the manufacturer page for details.

Product Condition

I have confirmed that it works properly. We are checking the following:
・Connect the Motors(HF-KP23) to the A and B axes and use the test operation function of MR Configurator 2 (setup software) to perform accurate positioning operation.
・The parameters can be read and written normally.
- Connect to the motion controller (Q172HCPU) and operate normally with SSCNET III.

Cumulative power ON time: 71869h
S/W number: BCD-B43W000 A1

When building an absolute position detection system, a battery (MR-J3WBAT, MR-BTCASE/MR-BAT) is required separately.
Also, the main circuit power supply connector, control circuit connector, Servo Motors power connector, cap, and wiring lever are not included, but there is no problem as they can be used as replacements for the same product.

Three claws for connecting the top and bottom of the main body cover are missing, so if you pull it, a gap will open, but it will not come off. In addition, scratches are noticeable on the whole, but there is no problem in using it.

Please refer to this page for details on how to check the operation of this product at our company.