Product Overview and Specifications

This is a valuable product that has already been discontinued.

Power supply: Single phase 100-115V 50/60Hz
Output current: 0.75A/phase Type: Pulse train input type

Product Condition

I have confirmed that it works properly. We are checking the following:
・The Motors(PK543NAW) should be connected and accurate positioning operation should be possible.
・Switch the pulse input method selector switch to switch between the 1-pulse input method and the 2-pulse input method.
・The step angle must be changed by switching the step angle setting switches (DATA1, DATA2).
・Connect a switch to the step angle switching input to change the step angle set in DATA1 and DATA2.
・Turn on the output current off signal input to shut off the Motors current.
・Connect an LED to the excitation timing output and make sure that the output is normal.

The accessory is a combination connector.
Mounting hardware not included.

The display on the front of the cover has disappeared in some places, but the model number can be confirmed on the product specification label.
There are scratches here and there, but the case is in relatively good condition with little deformation and internal dirt.