Product Overview and Specifications

This is a valuable product that has already been discontinued.

Number of pixels: 512 (H) x 480 (V)
Camera input: 2 points Power supply voltage: DC24V ±10%

Please see the manufacturer page for details.

Product Condition

I have confirmed that it works properly. We are checking the following:
・Connect a camera (CV-020) to each of the "CAMERA-1" and "CAMERA-2" ports, and the captured image should be displayed normally on the monitor.
・Connect this machine and a PC with Ethernet, and operate according to the command sent using terminal emulator software.
・Connect this unit and a PC with RS-232C, and send and receive data normally using the PC's serial communication software and the functions of the "IO monitor" and "RS-232C input/output" screens of this unit.
- Input signals to all input terminals of the parallel I/O connector and terminal block, and ensure that the controller recognizes each signal normally.
・Connect a load (buzzer) to all output terminals of the parallel I/O connector and terminal block, and ensure that each output circuit operates normally. However, the RUN signal remains ON at all times.
- Load the memory card and read/write the settings, and the memory slot should work normally.

Parallel I/O RUN signal is not working properly.

Console (OP-42342) is not included.

There are fine scratches and dirt on the whole, but there is nothing noticeable and the condition is good.