Product Overview and Specifications

Power supply voltage: DC24V±10%
Camera input: color/black and white 2 points (2 points can be added by connecting the expansion unit XG-E700, up to 4 points can be connected)
Compatible cameras: XG-200C/200M/S200C/S200M/H200C/H200M/H100C/H100M/035C/035M/S035C/S035M/H035C/H035M
Trigger input: Simultaneous capture/individual capture selectable from up to 4 cameras (simultaneous capture up to 2 cameras when XG-E700 is not connected)
Image processing main processor: DSP (high-speed type)
Number of registered inspection settings: Up to 1000 settings each for SD card 1 and SD card 2 (depending on SD card capacity and settings) Number of registered screens that can be externally switched: Up to 1000 screens per camera per setting (depending on SD card capacity) Supports compression save function, image registration with image after position correction, partial image registration, external switching possible by referring to variables Memory card: SD card slot x 2 (SDHC compatible) CA-SD1G (1GB), CA-SD4G (4GB: SDHC) compatible)
Display language: Japanese/English/Chinese (simplified)/Chinese (traditional)/German Switchable Lighting control: By connecting the optional lighting expansion unit CA-DC30E/DC21E, the lighting and light intensity control of the LED lighting can be performed. Possible

For details, please see the "XG-7000 Series Controller Instruction Manual" from " Download " on the manufacturer's page. (requires membership registration)

Product Condition

I have confirmed that it works properly. We are checking the following:
・Connect a camera (CV-020) to each of the "CAMERA-1" and "CAMERA-2" ports, and the captured image should be displayed normally on the monitor.
・Connected to a computer via USB and communicated normally.
・Connect this machine and a PC with Ethernet, and operate according to the command sent using terminal emulator software.
・Connect this unit and a PC with RS-232C, and send and receive data normally using the PC's serial communication software and the functions of the "IO monitor" and "RS-232C input/output" screens of this unit.
- Input signals to all input terminals of the parallel I/O connector and terminal block, and ensure that the controller recognizes each signal normally.
・Connect a load (buzzer) to all output terminals of the parallel I/O connector and terminal block, and ensure that each output circuit operates normally.
- Load the memory card and read/write the settings, and the memory slot should work normally.

Firmware version: 4.1.0010
Hardware version: 1.1

An IN connector and an OUT connector are attached.
Console and SD card not included.

It is in good condition with only some scratches here and there.