Product Overview and Specifications

Power supply voltage: DC24V (±10%)
Instruction execution speed: Basic instructions: Minimum 10ns
- Application command: Minimum 20ns
- Double-precision floating-point instructions: Minimum 2,350ns
Program capacity: Approx. 260k steps
CPU unit I/O: 16 points (input), 8 points (output)
Maximum number of units that can be installed: 16 units (48 units when extension units are connected)
Maximum I/O points: Maximum 3,096 points when expanded (when adding two KV-EB1S/KV-EB1R units and using a 64-point I/O unit)
Positioning pulse output: 2 points (maximum output frequency 100kHz)
Program memory: Flash ROM, rewritable 100,000 times Device: 5 years by battery (when operating at an ambient temperature of 25°C and in a power outage state)

Please visit the manufacturer's page for details.

Product Condition

We have confirmed that it works properly. We have checked the following:
- Programs can be read and written normally.
- No errors should occur when running the program.
-Communication is possible via both the USB connector and the EtherNet connector.
- Programs can be read and written normally to the installed memory card.
- The LEDs on the input/output connector and input/output display section light up normally.
- The +5V power output is within ±10%.
- All clear can be performed from the access window.

If you want to enable the power failure backup function, you will need to prepare a new backup battery (OP-51604).
For instructions on how to replace the battery, please see "KV-5500/5000/3000/1000 Backup Battery Replacement Procedure."

Accessories include a start unit and an end unit.

Feature Version: 1

The power terminal cover and USB port cover have been removed. The unit is in very good condition with only minor scratches and dirt here and there.