Product Overview and Specifications

This is a valuable product that is no longer in production.

Number of control axes: 3 axes Interpolation function:
・2-axis linear interpolation ・2-axis circular interpolation Control units: mm, inch, degree, pulse
Number of positioning data ・Setting by peripheral device: 600 data/axis can be set ・Setting by sequence program: 100 data/axis can be set Maximum output pulse ・When connected to differential driver: 400k pulse/s
・When connected to an open collector: 200k pulse/s
Number of occupied I/O points: 32 points (I/O allocation: special 32 points)

Please visit the manufacturer's page for details.

Product Condition

We have confirmed that it works properly. We have checked the following:
- Signals are input to the drive unit ready signal, in-position signal, zero point signal, near point signal, upper and lower limits, stop signal, speed/position switching signal, and external start, and each signal is recognized correctly by the CPU.
・30KHz pulse signals can be output from the open collector output and differential output of all axes, ensuring accurate output without deviation of even a single pulse. A high-speed counter unit (A1SD62E) is used to count the pulses.
- Data can be read and written normally from the CPU to the buffer memory of this product.
- The teaching unit (AD75TU) can be connected and RS-422 communication can be performed normally.

Year of manufacture: 2000

The external wiring connector is not included. Also, the RS-422 connector cover has been removed.
It is in very good condition with only minor scratches here and there.