Product Overview and Specifications

This is a valuable product that is no longer in production.

Number of control axes: 2 axes Interpolation function: Linear interpolation function (when 2 axes at the same time)
Positioning data: 400 data/axis

Positioning・Mode: Position control mode・Positioning method: Absolute method/incremental method can be selected for each axis・Acceleration/deceleration processing: Automatic trapezoidal acceleration/deceleration

Please see the manufacturer page for details.

Product Condition

We have confirmed that it works properly. We have checked the following:
- Signals are input to the external inputs (near point signal, drive unit ready, stop signal, zero point signal) and each signal is recognized correctly by the CPU.
- This product outputs pulses at 10KHz, and the current position and the number of pulses actually output match without a deviation of even a single pulse (the high-speed counter unit "AD61" is used to count the number of pulses).
- The CPU can properly read and write data to the buffer memory of this product.
- The origin return operation functions normally (it decelerates in response to a near-point signal and stops in response to a zero-point signal).

Year of manufacture: 1995 Version: ZF

Although we have not operated the unit with any peripheral devices connected to the RS422 port, we have confirmed that the connector is not damaged.

An operating key is not included, but this is not a problem as it can be reused if you are replacing it with the same product.
If necessary, purchase a new battery (A6BAT) from MonotaRO or other stores.

The tab that holds the cover is missing. (See photo)
There are scratches and small stains all over the product, but it does not affect use.