Product Overview and Specifications

This is a valuable product that is no longer in production.

Number of control axes: 2 axes Interpolation function: Linear interpolation function (when 2 axes at the same time)
Positioning data: 400 data/axis

Positioning・Mode: Position control mode・Positioning method: Absolute method/incremental method can be selected for each axis・Acceleration/deceleration processing: Automatic trapezoidal acceleration/deceleration

Please see the manufacturer page for details.

Product Condition

I confirmed that it works properly. We are checking the following.
- Input signals to external inputs (near point signal, drive unit ready, stop signal, zero point signal) and ensure that each signal is correctly recognized by the CPU.
・This product outputs pulses at 10kHz, and the current position and the actual number of pulses emitted must match without a difference of one pulse (high-speed counter unit "AD61" is used to count the number of pulses).
- The CPU must be able to read and write data normally to the buffer memory of this product.
- The return-to-origin operation functions normally (confirm that it decelerates with the near-point signal and stops with the zero-point signal).

Year of manufacture: 1995 Version: ZF

We do not operate with peripheral devices connected to the RS422 port.

Although the operation key is not included, there is no problem as it can be used as a replacement for the same product.
If necessary, please purchase a new battery (A6BAT) from Monotaro , etc.

The RS422 port connector is tilted.
The corner of the hook that hooks onto the base unit is missing. (See photo)
There are other scratches and dents throughout, but there are no problems with using it.