Product Overview and Specifications

This is a valuable product that is no longer in production.

Number of control axes: 2 axes Interpolation function: Linear interpolation function (when 2 axes are controlled simultaneously)
Positioning data: 400 data/axis

Positioning mode: Position control mode, speed → position control switching mode, speed control mode Positioning method: Absolute method/increment method selectable for each axis Acceleration/deceleration process: Automatic trapezoidal acceleration/deceleration

Please visit the manufacturer's page for details.

Product Condition

I confirmed that it works properly. We are checking the following.
- Input signals to external inputs (near point signal, drive unit ready, stop signal, zero point signal) and ensure that each signal is correctly recognized by the CPU.
・This product outputs pulses at 10kHz, and the current position and the actual number of pulses emitted must match without a difference of one pulse (high-speed counter unit "AD61" is used to count the number of pulses).
- The CPU must be able to read and write data normally to the buffer memory of this product.
- The return-to-origin operation functions normally (confirm that it decelerates with the near-point signal and stops with the zero-point signal).

Year of manufacture: 1996 Version: AG

We do not operate with peripheral devices connected to the RS422 port.

Although the operation key is not included, there is no problem as it can be used as a replacement for the same product.
If necessary, please purchase a new battery (A6BAT) from Monotaro , etc.

There is rust on the RS422 port. (See photo)
There are some small scratches here and there, but the condition is relatively good.