Product Overview and Specifications

This is a valuable product that is no longer in production.

Number of control axes: 2 axes/unit Control method: Automatic trapezoidal acceleration/deceleration method Acceleration/deceleration rate: 2 to 2,000pps/1ms
Backlash correction: 0 to 9,999 pulses Manual operation: High-speed JOG/Low-speed JOG/Inching selection Number of input/output occupied points: High-performance I/O area 20CH

Position command/specified range: -8,388,607 to +8,388,606 pulse/data count: 53/1 axis

Speed ​​command/command range: 1 to 250,000pps
・Number of data: 15

Origin search ・Nearby signal: None/NO contact/NC contact selectable ・Origin signal: NO contact/NC contact selectable ・Origin correction: 0 to ±9,999 pulses ・Search speed: High speed, near speed setting possible

Manufacturer's suggested retail price: 190,000 yen

Please see the manufacturer page for details.

Product Condition

I confirmed that it works properly. Connect the stepping Motors driver and check the following.

・The CW/CCW limit input signal, near-home input signal, home input signal, and immediate stop input signal must function normally.
・This product outputs a 30kHz pulse, and there is no deviation of one pulse from the current position.
(High-speed counter unit C200H-CT001-V1 is used to count the number of pulses)
・Data can be transferred normally from the PLC to the data area of ​​this product.

Year of manufacture: 1999

There are no noticeable scratches or dirt on the whole, and the condition is very good.