Product Overview and Specifications

This is a valuable product that is no longer in production.

Program capacity: 15.2k words Data memory: 6k words Extended data memory: 6k words Number of input/output points: 880 points

RS-232C port x 2
Communication method: Half-duplex synchronous method: Start-stop synchronous Transmission speed: 1200/2400/4800/9600/19200bps
Transmission distance: up to 15m
Interface: EIA RS-232C compliant

Manufacturer's suggested retail price ・C200HG-CPU43: 152,000 yen ・C200HW-COM05-V1: 46,000 yen

For details, please see the setup manual on the manufacturer's page. (Requires member registration)
Please see the manufacturer page for details on the communication board.

Product Condition

We have confirmed that it works properly. We have checked the following:
- The CX-Programmer (support software) can be used to erase the built-in memory and read and write programs normally via both the peripheral port and the RS-232C port.
- Insert the memory cassette, read and write programs, and make sure the memory slot operates normally.
- No errors should occur when running the program.
- Port A and port B of the installed "C200HW-COM5-V1" are communicating via RS-232C, and the communication board is operating normally.

The product is shipped with all DIP switches set to OFF (factory default setting). If you want to enable the application command setting function, please set switch number 4 to ON, and if you want to use the serial communication port under standard communication conditions, please set switch number 5 to ON before use.

Year of manufacture・C200HG-CPU43: 2001・C200HW-COM05-V1: 2002

You will need to prepare a new battery (C200H-BAT09) separately. Please purchase the battery separately from a store such as Monotaro .

The cover of the RS232 connector has been removed, and the communication board "C200HW-COM5-V1" has been installed.
There are only scratches and small stains on the main body, nothing noticeable. It has not been used much, so it is in good condition for a used item.