Product Overview and Specifications

This is a valuable product that is no longer in production.

Power supply voltage: AC100-120V/200-240V 50/60Hz
External voltage output: DC24V max 0.3A
Built-in memory: RAM 16k words (program capacity: maximum 15.2k words)
Processing time for basic commands: 0.375 to 1.125 μs
- Application command: Approximately 1/4 of C200H (34-724μS)
Compatible memory cassette: C200HS-ME16K (EEPROM 16k words)

For details, please refer to the setup manual on the manufacturer's website. (Membership registration required)

The ON condition for this product's communication condition setting (switch number 5) differs between products manufactured after July 1995 and those manufactured before June 1995. Please note that for products manufactured before "**65" (June 1995), the stop bit is 1 bit and communication speed is 2400 bps.

Product Condition

I confirmed that it works properly. We are checking the following.
・Be able to erase the built-in memory and read and write programs using the programming software "CX-Programmer".
- Make sure that no errors occur when running the program.
・Memory cassette "C200HS-ME16K" is installed and programs are read and written, and the memory slot operates normally.
・The voltage of the 24V DC service power supply must be output within ±10%.

Year of manufacture: 2000

A new battery (C200H-BAT09) must be prepared separately. Please purchase the battery separately at a shop such as Monotaro .
The memory unit is not included, so please prepare it separately.

A short bar is attached to the terminal block.
One corner of the main unit is missing, and the screws used to secure the main unit to the base unit are rusted. In addition to small scratches and dirt throughout, the main body has turned yellow due to discoloration.