Product Overview and Specifications

This is a valuable product that is no longer in production.

Program capacity: 15.2k words Data memory: 6k words Extended data memory: 6k words*3
Number of input/output points: 1184 points

For details, please see the setup manual on the manufacturer's page. (Requires member registration)

Product Condition

We have confirmed that it works properly. We have checked the following:
- The CX-Programmer (support software) can be used to erase the built-in memory and read and write programs normally via both the peripheral port and the RS-232C port.
- Insert the memory cassette, read and write programs, and make sure the memory slot operates normally.
- No errors should occur when running the program.
- "C200HW-COM2-V1" is installed, RS-232C communication is performed, and the communication board is operating normally.

The unit is shipped with all DIP switches set to OFF (factory default). If you wish to enable the application command setting function, please set switch number 4 to ON. If you wish to use the serial communication port under standard communication conditions, please set switch number 5 to ON before use.

Year of manufacture: 2000

You will need to prepare a new battery (C200H-BAT09) separately. Please purchase the battery separately from a store such as Monotaro .

There are some scratches and stains on the main body, but nothing too noticeable, so it is in good condition.