Product Overview and Specifications

This is a valuable product that is no longer in production.

Power supply voltage: AC100-240V 50/60Hz
Allowable power supply voltage: AC85 to 264V
External power supply: DC24V, 300mA
Number of inputs: 12 points Number of outputs: 8 points Output format: Relay control method: Stored program method Input/output control method: Cyclic scan method Program language: Ladder chart method User program capacity: 4096 words Analog setting volume: 2 points (setting range: 0 to 200)

Please visit the manufacturer's page for details.

Product Condition

We have confirmed that it works properly. We have checked the following:
- Peripheral port: Can be connected to a PC to send and receive data using the dedicated software "CX-Programmer."
-RS-232C port: Can be connected to a PC to send and receive data using the dedicated software "CX-Programmer."
- Input signals to all input terminals and ensure that each signal is recognized correctly.
- There are no short circuits in the internal circuits and all output terminals operate normally.
- Monitor the unit with "CX Programmer" and turn the analog volume (0 and 1) to change the program value.
・An expansion unit is connected to this unit. The signal input to the expansion unit is recognized by this unit, and the signal is output from the expansion unit according to the instructions from this unit.
- Connect an electronic load to the service power supply and, when the load is applied, output is within 24V DC ±10%.

Year of manufacture: 2005

You will need to prepare a new battery (CPM2A-BAT01) separately. Please purchase the battery separately from a shop such as Monotaro .

It is in very good condition, with only minor scratches here and there.