Product Overview and Specifications

Output specifications: Vacuum/residual pressure piping specifications: Φ6 Reducer switch output: Current pressure ≦ Set pressure: ON
Maximum working pressure: 1MPa
Setting pressure range: −0.1 to 0.4MPa
Applicable fluid: Air, non-corrosive gas, non-flammable gas Hysteresis: 4% FS or less Power supply voltage: DC 12 to 24 V ± 10%, ripple (pp) 10% or less The set pressure increases with clockwise rotation, so use high vacuum. When setting, rotate counterclockwise.

Product Condition

Operation has not been confirmed. In the unlikely event that a failure or defect is found after purchase, we will refund your purchase within 3 months of receiving the product, or replace it with a replacement product if it is in stock, according to our warranty policy .
There are some scratches and dirt, and the cable is short.