Product Overview and Specifications

This is a valuable product that is no longer in production.

Rated voltage: AC100~240V
Screen memory: 4,992k bytes Display device: TFT Color display resolution: 640 x 480 dots Display size: 10.4 inches Display colors: 32,768 colors + 16 blink colors

External interface: D-Sub 25 pin (CN1), modular 8 pin (MJ1/MJ2), printer, CF card touch switch specifications: Analog resistive film

Please see the manufacturer page for details.

Product Condition

I confirmed that it works properly. We are checking the following.
・CN1 port: Connect to the computer link unit (A1SJ71UC24-R2/A1SJ71UC24-R4) and be able to perform RS-232C and RS-422/485 communication normally.
・MJ1/MJ2 port: Connect to the CN1 connector, and the loopback test for both RS-232C and RS-485 must be successfully completed.
・MJ1 port: Screen data created using the drawing software "V-SFT" can be transferred normally.
・CF card interface: The CF card must be installed and the settings of this machine can be read and written normally.
・Touch switch: The switch should respond normally across the entire surface.
・Screen display: There should be no abnormality in color reproducibility or visibility.

Year of manufacture: 2006 Hard version: g

A waterproof gasket is attached. Also included are mounting hardware.

A new battery (V7-BT) is required to back up the SRAM user memory area and built-in clock.
Although it is included with this machine, it is more than 5 years old. If you need it, please purchase it at Monotaro etc.

There are some small scratches overall, but nothing noticeable. There are no noticeable scratches or dirt on the screen, and the visibility of the display is good.