Product Overview and Specifications
This is a valuable product that is no longer in production.
Rated voltage: DC24V
Screen memory: 12.5MB Display device: TFT Color Display resolution: 800 x 600 dots Display size: 8.4 inches Display colors: 65,536 colors (without blinking) / 32,768 colors (with blinking)
External interface: D-Sub 9 pin (CN1), modular 8 pin (MJ1/MJ2), USB (A type/B type), CF card touch switch specifications: Analog method
Please see
the manufacturer page for details.
In the product introduction on the manufacturer's page, there is
an 'N' at the end of the model number . The connector for connecting the optional unit has been changed.
Product Condition
I confirmed that it works properly. We are checking the following.
・CN1 port: Must be able to connect to the computer link unit (A1SJ71UC24-R2/A1SJ71UC24-R4) and perform RS-232C and RS-422 communication normally.
・MJ1/MJ2 port: Must be able to connect to the computer link unit (A1SJ71UC24-R2/A1SJ71UC24-R4) and perform RS-232C and RS-485 communication normally.
・MJ1 port: Screen data created using the drawing software "V-SFT" can be transferred normally.
・USB-A port: A mouse can be connected and the mouse can be operated normally.
・USB-B port: Screen data created using the drawing software "V-SFT" can be transferred normally.
・CF card interface: The CF card must be installed and the settings of this machine can be read and written normally.
・Touch switch: The switch should respond normally across the entire surface.
・Screen display: There should be no abnormality in color reproducibility or visibility.
Year of manufacture: 2013 Hard version: r
A waterproof gasket is attached. The accessories are mounting hardware.
A new battery (V7-BT) is required to back up the SRAM user memory area and built-in clock.
Although it is included with this machine, it is more than 5 years old. If you need it, please purchase it at
Monotaro etc.
There are some small scratches overall, but nothing noticeable. A protective film was attached to the screen, so there were no scratches or dirt and the display visibility was good. The protective film had a lot of scratches and dirt, so we removed it and removed the double-sided tape marks.