Product Overview and Specifications

Input power voltage: DC24V (+10% -15%)
Display panel: TFT color LCD, 640 x 480 dots Backlight: LED (life span: approx. 60,000 hours or more)
Touch switch: Analog resistive film type, only one touch possible User memory capacity: Storage memory (ROM): 32MB, Operating memory (RAM): 80MB
PC connection tool port, PLC connection serial I/F
Operation switch: 6 switches (6 contacts/common)
Grip switch: 1, 3-position switch Emergency stop switch: 1, push lock switch Selector switch with key

Please check the manufacturer's page for details.

Product Condition

We have confirmed that it works properly. We have checked the following:
- USB port: Capable of transferring project data.
-RS-232C port: Can be connected to Omron's CQM1 series PLC to enable RS-232C communication with the PLC.
-RS-422 port: Can be connected to Mitsubishi's CPU unit (A2USHCPU) to enable RS-422 communication with PLC.
-Hard switch: The outputs of the six operating switches must work.
- Output ports: ES1, ES2, DSW1, DSW2, KSW1, KSW2, and ES3 outputs are operational.
- The GRIP SW LED should light up.
- USB interface (device): Connect the mouse and this product will recognize it correctly.
-SD card slot: The SD card must be recognized correctly, and project information must be able to be uploaded, downloaded, and formatted normally.
- The write/read check of the standard SD card and built-in flash memory is normal.
- The touch switch responds normally across the entire surface.
- There are no missing dots.
- There is no abnormality in the visibility of the display.

・LAN port: Not confirmed as there is no equipment.

Year of manufacture: 2020

You will need to prepare a new battery (GT15-BAT) separately. Please purchase the battery separately from a shop such as Monotaro .

Accessories include one selector switch key, a hand strap, and a wall hanging hook.
It is in very good condition, with only minor scratches here and there.